









01
23-02
Do you know these uses of Automatic Potential Titrator
2023-02-01
Automatic Potential Titrator consists of two parts, the electrometer and the titration system. The electrometer uses an electronic amplification control circuit to compare the potential between the indicator electrode and the reference electrode with a preset end point potential.
28
22-11
Introduce the basic operation steps of automatic potentiometric titrator
2022-11-28
Automatic potentiometric titrator is a common analytical instrument designed for capacity analysis based on the principle of potentiometric method.
14
22-11
Use of automatic potentiometric titrators
2022-11-14
The automatic potentiometric titrator is divided into two parts: the electric meter and the titration system. The electric meter adopts an electronic amplification control circuit to compare the potential between the indicator electrode and the reference electrode with a preset terminal potential,
10
22-11
Precautions when using COD analyzer
2022-11-10
The maximum amount of chloride ion complexed with 0.4g of mercury sulfate can reach 40mg. If 20.00mL of water sample is taken, the water sample with a maximum chloride ion concentration of 2000mg/L can be complexed.
04
22-11
Basic operating steps of an pH Meter
2022-11-04
1. Take the pH electrode out of the saturated kcl aqueous solution, wash it with distilled water and wipe it clean. 2. Insert the pipette into distilled water, and insert the burette into the waste bottle.
02
22-11
Precautions when using an automatic potentiometric titrator
2022-11-02
The input terminal (electrode socket) of the instrument must be kept dry and clean. When the instrument is not in use, insert the Q9 short-circuit plug into the socket to prevent the intrusion of dust and water vapor.

PRECISION PERFECT
Contact Us
-
Tel:0086-021-39506429/39506392
Mail:info@lei-ci.com
-
Fax: 0086-021-39506398