M510T Multi-parameter Analyzer

Features

GENERAL FEATURES

Color High contrast LCD touchscreen, 4.3 inches.
Intelligent operation system provides features including user management, calibration management, electrode management, method management, data management, Log Management, etc.
Multi-reading feature allows auto-read, timed-read and continuous-read.
Automatic/Manual temperature compensation ensures accurate results.
Auto-hold feature senses and locks the measurement endpoint.
Data Storage 1000 sets of each parameter (GLP-compliant).
Data analysis feature helps user review, compare and recalculate results.
USB communication for PC software, USB 2.0 flash drive, barcode scanner.
Auto-power off feature effectively extends the battery service life.
Reset feature automatically resumes all settings back to factory default options.
IP65 waterproof. The portable meter is suitable for fields measurements and out door measurements.

1-8 points calibration with Standard Recognition.
Selectable pH buffer groups, including USA, NIST, DIN, GB, MERK, JIS, GOST.
User-defined pH buffer or buffer group is supported.
Automatic electrode diagnosis with pH slope and offset display.

Ion

1-8 points calibration.
Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm and ppb.²
Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.
Over 10 methods are built-in, including F^-, Cl^-, Br^-, I^-, NO₃^-, BF₄^-, NH₄⁺, K⁺, Na⁺, Ca²⁺, Cu²⁺, Pb²⁺, Ag⁺, etc. User-defined method is supported.

Conductivity

1-5 points calibration automatically recognizes the standard solutions.
Settable parameters, including cell constant, reference temperature (5/10/15/18/20/25°C), temperature compensation coefficient and TDS factor.
Temperature compensation type (none, linear, pure water).

Support for air-saturated water or zero oxygen calibration.
Auto barometric pressure compensation
Manual Salinity Factor Correction
Selectable pressure unit, including kPa, mbar, Torr, Atm.
Support for fluorescence quenching method and polarographic Method.

Includes

E-301-QC 3 in 1 pH composite electrode
DJS-1VTC Conductivity Electrode
DO-968-Q Optical DO electrode
pH standard solution(4.01, 7.00, 10.01) , 50mL/vial
1413μS/cm EC standard solution, 50mL, 1 vial
Electrode holder
Silicone rubber case
Wristbands
Touch pen
Carrying case

Specifications

Model		M510T
Parameters		pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation)
pH	Range	(-2.000~20.000) pH
	Resolution	0.1pH, 0.01pH, 0.001pH
	Accuracy	±0.002 pH
	Calibration Points	Up to 8
	Standard Customization	Yes
	Calibration Reminder	Yes
	Standard Recognition	USA, NIST, MERK, JIS, GB, DIN, GOST buffers
	Slope Limit	Yes
mV/ORP	Range	(-2000.00~2000.00) mV
	Resolution	1mV, 0.1mV, 0.01 mV
	Accuracy	±0.1mV or ±0.03%
	EH ORP Mode	Yes
	ORP Calibration Points	1 custom point (relative mV)
pX	Range	(-2.000~20.000) pX
	Resolution	0.1pX, 0.01pX, 0.001pX
	Accuracy	±0.002 pX
	Calibration Points	Up to 8
ISE	Range	1.000e-9 ~ 9.999e+9
	Units	mol/L, mmol/L, g/L, mg/L, μg/L, ppm, ppb
	Resolution	Up to 4 significant digits
	Accuracy	±0.3%
	Calibration Points	Up to 8
Conductivity	Range	0.000μS/cm~3000mS/cm
	Resolution	0.001μS/cm minimum, changed with range
	Accuracy	±0.5% FS
	Reference Temperature	5ºC, 10ºC, 15ºC, 18ºC, 20ºC, 25ºC
	Calibration Points	Up to 5
	Calibration Reminder	Yes
	Standard Recognition	10μS/cm, 84μS/cm, 500μS/cm, 1413μS/cm, 12.88mS/cm; 146.5μS/cm, 1408μS/cm, 12.85mS/cm, 111.3mS/cm
Resistivity	Range	5.00Ω·cm~100.0MΩ·cm
	Resolution	0.01Ω·cm minimum, changed with range
	Accuracy	±0.5% FS
TDS	Range	0.000 ppm~1000 ppt
	Resolution	0.001ppm minimum, changed with range
	Accuracy	±0.5% FS
Salinity	Range	(0.0～80.0) ppt
	Resolution	0.1ppt
	Accuracy	±1ppt
Dissolved Oxygen (Optional fluorescent DO electrode)	Sensor Type	DO-968-HC Optical DO electrode
	Range	(0.00~20.00)ppm
	Resolution	0.01ppm
	Repeatability	0.15ppm
	Accuracy at 0% DO	≤0.1ppm
	Measurement Accuracy	±0.30 ppm
	Response time	≤ 45s (90% response at 20°C).
	Salinity Compensation Accuracy	±2%
	Calibration Reminder	Yes
	Calibration Points	Air-saturated water or zero point
	Barometric Compensation	Yes
	Manual Salinity Factor Correction	Yes
Saturation (Optional fluorescent DO electrode	Range	(0.0～200. 0)%
	Resolution	0.1%
	Measurement Accuracy	±10.0%
Dissolved Oxygen Concentration (Polarographic)	Sensor Type	DO-958-Q polarographic DO electrode
	Range	(0.00~99.99) ppm
	Resolution	0.01 ppm
	Accuracy	±0.10ppm, (0.00~50.00)ppm ±0.50ppm, (50.0~99.99)ppm
	Calibration Reminder	Yes
	Calibration Points	Air-saturated water or zero point
	Barometric Compensation	Yes
	Manual Salinity Factor Correction	Yes
Saturation (Polarographic)	Range	(0.0~ 600.0)%
	Resolution	0.10%
	Accuracy	±2.0%
Temperature	Range	(-10.0～135.0)ºC, (14.0~275.0)ºF
	Unit	ºC, ºF
	Resolution	0.1ºC, 0.1ºF
	Accuracy	±0.1ºC
Measurement	Reading Mode	Auto Read (Fast, Medium, Slow), Timed, Continuous
	Reading Prompts	Reading, Stable, Locked
	Temp. Compensation	ATC, MTC
Data management	Data Storage	1000 Groups
	GLP Features	Yes
Inputs	pH Electrode	BNC(Q9)
	DO with Temp. Probe	4-pin aviation connector
	Conductivity with Temp. Probe	5-pin aviation connector
Outputs	USB	USB 2.0 flash drive, PC, Bluetooth Printer
Display options	Backlight	Yes
	Auto Shutdown	300, 600, 1200, 1800, 3600 sec., off
	IP Rating	IP65
	Date and Time	Yes
General	Power	Rechargeable Lithium battery, AC Adapter(Input:100-240V AC; Output: 5V DC, 2A)
	Dimensions	90×255×40 mm
	Net Weight	500g

Download

Learn More >>

M510T Operation Quick Guides.pdf

Brochure M510T Multi-parameter Analyzer.pdf

Videos

Learn More >>