How to use potentiometric titrator for titration analysis

2022-12-26

Install the titration device, insert the silicone tubes at both ends of the solenoid valve into the joints of the burette and the drip tube.

Care and Maintenance of ISE Probes

2022-12-05

There are three main precautions you can take to ensure long life and accurate measurements: keep the ISE filled with electrolyte fill solution, store the electrodes properly, and replace the membrane when needed.

Introduce the basic operation steps of automatic potentiometric titrator

2022-11-28

Automatic potentiometric titrator is a common analytical instrument designed for capacity analysis based on the principle of potentiometric method.

pH/ion meter operation steps

2022-11-21

After pressing the measurement key of the instrument, clean the electrode with deionized water, and wait for the instrument potential value to display above 340mv, then start to measure the sample liquid.

Instrument characteristics of automatic potentiometric titrator

2022-11-16

During the titration process, the acquisition signal is 0.1 mV, and the minimum titration feed can reach 0.0025 ml, which is about 10 times higher than that of other common titrators.

Use of automatic potentiometric titrators

2022-11-14

The automatic potentiometric titrator is divided into two parts: the electric meter and the titration system. The electric meter adopts an electronic amplification control circuit to compare the potential between the indicator electrode and the reference electrode with a preset terminal potential,